Go back to catalogue

XL 30

XL 30

A thixotropic, semi-colloidal, stabilised suspension of high purity graphite in water.

Product Code: 65300

Mobile, easy to handle liquid

Contains additives, which reduce the corrosion of metallic substrates and improve surface coating characteristics

Ideal for dilution prior to use

Contains ammonia to reduce the risk of bacterial degradation during storage.

Applications / Typical Treat Rates

Lubrication of die-sets in hot forging processes of ferric billets where the following requirements exist:
Long die-life, even where steep draft angles and extensive displacements are required.
Prevention of billet to die adhesion.
Accurate filling of dies.
Prevention of ejector pin seizure.
Assistance of scale removal from the billets surface.
Forging lubricant 5 – 10% w/w
XL 30 should be diluted with water prior to use. On site trials should be conducted to determine the most cost-effective dilution rate. Experience has shown that dilutions of between 9 & 19 parts water are quite acceptable.

Please Note: The product images shown are for illustration purposes only and may not be an exact representation of the product.
Pack Sizes
Depending on the range, Rock Oil products are available in multiple sizes, including 400ml aerosols and 1L / 4L / 5L / 20L / 210L / bulk containers.