COMPRESSOR-GUARD™ GAS PAG 68
Product code: 15320
The COMPRESSOR-GUARD™ GAS PAG range are premium quality, synthetic lubricants developed for use in centrifugal and oil-flooded rotary screw and rotary vane compressors processing natural gas, carbon dioxide, propane or...
Features
- Highly resistant to dilution by hydrocarbon gases and washout by condensed hydrocarbon liquids
- Resists absorption into the gas stream and subsequent carryover of the lubricant downstream
- Outstanding oxidation resistance and thermal stability at high temperatures
- High viscosity index and low pour point for use over a wide temperature range
- High film strength for wear protection and protects against rust and corrosion
- Extended service intervals compared to conventional mineral oil-based lubricants
- Compatible with commonly used seals, gaskets and hoses (1)
- Water insoluble
DIRECTIONS AND USE
Make sure the correct ISO viscosity grade COMPRESSOR-GUARD™ GAS PAG product is used according to the equipment manufacturer’s recommendations. Polyalkylene glycol based lubricants with excellent protection against yellow metal staining. Recommended for use in propane refrigeration and other light, sweet natural gas applications
NOTE (1) the COMPRESSOR-GUARD™ GAS PAG range is compatible with neoprene, silicone rubber, torlon, vespal and viton, as well as epoxy paints. It is not compatible with oil-based paints or solvents, such as diesel fuel, kerosene, heptane, methanol, ethylene glycol or triethanolamine.
NOTE: the COMPRESSOR-GUARD™ GAS PAG range is not compatible with petroleum compressor oils. Care should be taken to avoid mixing the two products. When switching over from mineral oil to the COMPRESSOR GUARD™ GAS PAG range, a complete flush, drain and refill should be performed.
Description
The COMPRESSOR-GUARD™ GAS PAG range are premium quality, synthetic lubricants developed for use in centrifugal and oil-flooded rotary screw and rotary vane compressors processing natural gas, carbon dioxide, propane or other hydrocarbon gases. These is specially formulated to resist hydrocarbon dilution and oil absorption in this type of service, and are formulated with synthetic Polyalkylene glycol (PAG) base oils and carefully selected additives to provide long service life, excellent wear protection, resistance to washout and lubricant carryover, and protection against rust and corrosion. Absorption of the oil into the gas stream causes high oil consumption and carryover into the process gas, and can cause depletion of the protective oil film on the cylinder walls. Resistance to gas dilution and oil absorption helps maintain proper viscosity and oil film thickness to protect against wear.
Size Options
Depending on the product range, Rock Oil products are available in various sizes, including aerosols (where applicable), 12x1L packs, 4x4L packs, 4x5L packs, 20L containers, barrels, 1000L IBC's, and bulk deliveries from 500L to 30,000L.
Rev.: E20